No. 99MAH040B
・ The parameter-lock function is to disable each setting and all reset operation, and it is
available only while communicating with PC.
・ When the parameter lock is enabled, the locked parameter cannot be edited with the
instrument.
・ While the parameter lock is enabled, the "EDIT" sign with the lower right key will not be
displayed.
・ When the MENU Key is set to “Lock”, the parameters other than PC communication
cannot be confirmed and set by operating the key of this instrument. Release the Lock
of MENU Key by conducting the PC communication if you want to confirm or set each
parameter.
To Next Page
Loading...
