No. 99MBA091A
iii
Notes on LED Safety
An LED is integrated into the illuminator in this measuring microscope, MF/MF-U series.
Please observe the following to use the product in a safe manner. Operations other than
described in the manual may result in dangerous radiant exposure.
CAUTION
1) The JIS (JIS C 6802, established in 2005) and the International Standard (IEC60825-1,
established in 2001) are the safety standards for LED devices.
2) The LED device is classified as “Class 1 LED product” in the JIS and IEC standards.
3) Do not look into LED light.
(Never look into LED light even when light is not emitted.)
4) Do not look at laser light directly with an optical instrument (light condensing device
such as a magnifying glass).
5) Skin exposure to LED light causes no problem.
To Next Page
Loading...
Need help?
General
