No. 99MBA091A
v
● Power cord
Use only the power cord supplied with this product. Please contact us if an abnormality
is observed on the power cord or power connector.
● Removing the cover and disassembling the machine
This machine is precisely adjusted, and is comprised of high-voltage parts. In order to
prevent accident and to maintain the performance, do not absolutely remove the cover
on the machine.
● Danger prevention
In order to prevent danger, do not use the machine in locations where volatile gases
could be generated.
● Maintenance
Gently wipe off dirt from the machine using a lint-free and soft cloth. If the dirt is difficult
to remove, wipe it clean with a cloth soaked in neutral detergent, then wipe lightly with
a dry cloth or a cloth well-wrung after soaking in water. Do not use organic solvents
such as thinner or benzine.
● Take special shielding measures when using the machine in the following
locations:
• Where noise is generated due to static electricity
• Near strong electric fields
• Where power source lines pass nearby
• Where there is a risk of radioactivity
• Where the machine could be subject to corrosive gasses
To Next Page
Loading...
Need help?
General
