2. INSTALLATION
2.3 Overall System Connection
This section describes the connection method of this system. Connect each system
component according to Fig. 2-2.
Fig. 2-2
Measurin
Main Unit
Remote box
Controller
USB communication
cable
To computer
Grounding cable
To Grounding
Machine signal cable
AC power cable
Motor cable
To AC power supply
SV cable
CAUTION
•Before starting the connection work make sure that all the power supplies to the
machines are OFF. The connection work should be performed so that there is no
chance of mismatching or unplugged connectors or poor contacts.
No. 99MBB187A
2-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
