<<CAUTION>>
Notifies the operator of the possible failure due to incorrect handling under
specific conditions
G, H: Do not touch the fine feed wheels of the X axis and Z axis while the
detector is being electrically moved via the joystick or PC. The wheel is
rotated by the rotating force of the motor, and thus dangerous conditions
may result.
Controller
<<Do not disassemble>> Disassembly is prohibited.
The SV-3100 series is a measuring system that has been precisely adjusted
and includes high-voltage electronic internal parts. Never remove the
cover, so as to avoid accidents and maintain performance.
No. 99MBB187A
iv
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
