This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Change of load balance
A change in load balance can suddenly pull on the hoisting rope or
chain.
Unstable load
If the load is unstable, it can exert sudden force on the hoisting rope
or chain.
The contents of packing cases should be securely fastened so that
they cannot move around during lifting.
Rapid load reduction
A sudden loss of the load can cause the trolley/hoist to jump.
Avoid shock loading the product. Shock loading the product could
damage the product or the load.
After a shock load equipment shall not be used before authorized
service personnel or an experienced service technician authorized
by the manufacturer or manufacturer’s representative has
determined that the equipment is safe to use. The usage of a
defective product can result in serious damage, injury or death.
Attaching the load
The load is usually attached to the product by means of some kind of under-the-hook lifting
device. The most common under-the-hook lifting devices are chains, wire rope slings and lifting
belts. The operator shall select a lifting device designed for the product being transported.
Always follow instructions provided by the lifting device manufacturer
when using under-the-hook lifting devices. Never use the product’s
ropes or chains as a sling to attach to the load.
To Next Page
Loading...