78
13. The System Setting Menu “System Setup”
The basic settings of the remote control transmitter are made in the system setup menu first. These settings are not
referred to individual models. The specific settings of the individual models are only made afterwards in the function
setting menu (see chapter 14).
To get to the system setting menu, push and hold the scroll wheel for about
1 second with the transmitter on. The operating display in the display switches
to the menu display. The selection window around the remote control icon
shows that you can call the system setup menu in this setting.
Briefly confirm the scroll wheel button or the button “OK” to get to the system
setup menu.
The first 6 menu items of the system setting menu are now displayed.
The following setting functions are available for you in the system setting menu:
Function Display
Model memory selection “Model select”
Model name settings “Model name”
Model type selection “Type select”
Copying model memory “Model copy”
Deleting model memory “Model reset”
Operation as a trainer transmitter “Trainer mode”
Operation as a student transmitter “Student mode”
Control stick assignment “Sticks mode”
Display brightness “LCD brightness”
Transmitter software version “Firmware ver.”
Transmitter software update “Firmware Update”
Factory reset “Factory reset”
Figure 14
To Next Page
Loading...
Need help?
General
