87
i) Display Brightness “LCD brightness”
To have a perfectly legible display signals at all times, you can set the brightness value individually.
Setting the brightness value
• Switch on the transmitter and call the system setting menu.
• Move the cursor arrow to the menu item “LCD brightness” with the scroll
wheel.
• Briefly confirm the scroll wheel button or the button “OK” to activate the
menu item.
The currently set brightness value is displayed with a numeric value and a
bar chart in the display. To better assess the brightness settings, the two
model icons at the lower display edge are indicated as well.
• Turn the scroll wheel to set the desired display brightness now.
• Push the button “OK” to save the settings. The display then shows the
system setup menu again.
• Push the button “CANCEL” repeatedly until you get back to the operating
display.
Figure 23
To Next Page
Loading...
