ModelCraft FS-T6 User Manual

88
j) Transmitter Software Version “Firmware ver.”
On demand, you can have the version number and the date of the transmitter software displayed. This way, you can
recognise at once whether there is a newer software for the transmitter that can be installed (see following menu item).
Display of the Transmitter Software Version
• Switch on the transmitter and call the system setting menu.
• Move the cursor arrow to the menu item “Firmware ver.” with the scroll
wheel.
• Briefly confirm the scroll wheel button or the button “OK” to activate the
menu item.
The transmitter designation, software version and date of the transmitter
software are displayed in the display.
• Push the button “CANCEL” repeatedly until you get back to the operating
display.
Figure 24

ModelCraft FS-T6 Specifications

General

Brand	ModelCraft
Model	FS-T6
Category	Remote Control
Language	English