Moeller DF5 series - Standard Form for User Defined Parameter Settings

Appendix
09/01 AWB8230-1412GB
120
Standard form for user defined parameter settings
The DF5 series frequency inverters have programmable parame-
ters. In the free Setpoint columns below, you can list the changes
you have made from the default settings.
PNU Function WE Setpoint
F01 Frequency setpoint value 0.0
F02 Acceleration time 1 in s 10.0
F03 Deceleration time 1 in s 10.0
F04 Direction of rotation 00 (clock-
wise)
PNU Function WE Setpoint
A01 Frequency setpoint definition via
• 00: Potentiometer
• 01: Input O/OI
• 02: PNU F01 and/or A20
01
A02 Start command definition via
• 01: Input FWD/REV
• 02: ON key
01
A03 Base frequency 50
A04 Maximum end frequency 50
A11 Frequency with minimum setpoint value 0
A12 Frequency with maximum setpoint value 0
A13 Minimum setpoint value (in %) 0
A14 Maximum setpoint value (in %) 100
A15 Start frequency
• 00: Apply PNU A11 to motor
• 01: Apply 0 Hz to motor
01
A16 Analog input filter time constant 8
A20 Frequency setpoint definition (PNU A01 must be 02) 0.0
A21 1st fixed frequency 0.0
A22 2nd fixed frequency 0.0
A23 3rd fixed frequency 0.0
A24 4th fixed frequency 0.0
A25 5th fixed frequency 0.0
A26 6th fixed frequency 0.0
A27 7th fixed frequency 0.0
A28 8th fixed frequency 0.0
A29 9th fixed frequency 0.0
A30 10th fixed frequency 0.0
A31 11th fixed frequency 0.0
A32 12th fixed frequency 0.0
A33 13th fixed frequency 0.0