Installation
09/01 AWB8230-1412GB
26
Electrical connection
In this section, you will find information for connection of the
motor and the supply voltage to the power terminals, and the
signal cables to the control terminals and signalling relay.
An overview of the connections can be found in the following
illustration.
Warning!
The wiring stages may only commence after the frequency
inverters have been correctly installed and attached.
Otherwise, there is a danger of electrical shock or injury.
Warning!
Wiring may only be carried out under no voltage
conditions.
Warning!
Only use cables, residual-current circuit-breakers and
contactors which have a suitable rating. Otherwise there
is a danger of fire.
To Next Page
Loading...
