Moeller DF5 series - DC Braking Configuration

09/01 AWB8230-1412GB
Setting the frequency and start
command parameters
79
Base frequency
The base frequency is the frequency at which the output voltage
has its maximum value.
Maximum end frequency
If you want to set another frequency range with a constant voltage
that lies beyond the base frequency set under PNU A03, this
frequency is set with PNU A04. The maximum end frequency may
not be smaller than the base frequency.
PNU Name Adjustable in
RUN mode
Value WE
A03 Base frequency – 50 to 360 Hz 50
Figure 76: Maximum end frequency
f
1
: base frequency
f
2
: maximum end frequency
PNU Name
Adjustable in
RUN mode
Value WE
A04 Maximum end
frequency
– 50 to 360 Hz 50
0
f
1
f
2
100
[%]
U
f
[Hz]