Why does my Monarch 9855 display “Please Wait RFID Initialization”?
If the Monarch Printer displays 'Please Wait RFID Initialization', it means you sent an RFID batch before the printer communicated with the interrogator. The printer will print the RFID batch once communication with the interrogator is complete.
What to do if my Monarch 9855 Printer displays “Monarch Initializing” and doesn't disappear?
If your Monarch Printer displays “Monarch Initializing,” this message should flash briefly when you turn on the RFID printer. If it does not disappear, turn off the printer, wait fifteen seconds, and then turn it back on.
What should I do if the backing paper is wrapped around the platen or peel roller of my Monarch 9855 Printer?
If the backing paper is wrapped around the platen or peel roller of your Monarch Printer, carefully remove the backing paper. Ensure the backing paper tears at the saw-toothed tear edge when using backfeed and peel mode.
How to fix blank labels printing or 750 series errors on Monarch 9855 Printer?
To address blank labels printing or 750 series errors on your Monarch Printer, clean the supply sensors.
What should I do if a script doesn't appear to be loaded after downloading it to my Monarch 9855?
If, after downloading a script, it does not appear to be loaded on your Monarch Printer, try formatting the flash memory and then download the script again.
How to resolve Monarch Printer that does not feed?
If your Monarch Printer does not feed, set the wide/narrow knobs correctly.
What does it mean if I get an error message during startup of my Monarch Printer?
If you're getting an error message during the startup of your Monarch Printer, turn off the printer, wait fifteen seconds, and then turn it back on. If the error message reappears, contact service.
What to do if my Monarch Printer errors when downloading a script?
If your Monarch printer encounters an error when downloading a script, check the available flash memory. You may need to format flash memory or clear NVRAM.
What to do if my Monarch 9855 is printing light?
If your Monarch printer is printing too lightly, try these steps: change the supply, adjust the print contrast, check the wide/narrow knobs, and check the ribbon.
What to do if my Monarch Printer is printing heavy?
If your Monarch printer is printing too heavily, try these steps: clean the printhead, change the supply, adjust the print contrast, check the wide/narrow knobs, and check the ribbon.
Step-by-step instructions for loading label rolls or tag supplies into the printer.
Specific procedures for loading labels when using the optional peel mode feature.
Guidance on using linerless printing supplies and related setup.
Instructions for loading and considerations for using string tag supplies.
Detailed steps for correctly loading a ribbon roll into the printer.
How to configure the printer for different types of supply materials like die-cut or continuous.
Configuring ribbon usage and adjusting the printer's print speed for optimal performance.
Configuring the printer's feed mode and backfeed settings for label handling.
Adjusting print, margin, cut, and dispense positions for accurate label output.
Adjusting the darkness and quality of the printed output for optimal readability.
Instructions for enabling and setting up the optional barcode verifier.
Configuring serial port parameters like baud rate, word length, parity, and flow control.
Configuring parallel port settings, including port selection and communication mode.
Options for using flash storage, formatting, checking availability, and packing memory.
Guidance on resolving common printer errors, messages, and operational issues.
General| Resolution | 203 dpi |
|---|---|
| Print Method | Thermal Transfer |
| Max Print Width | 4.09 in (104 mm) |
| Media Sensor | Reflective and Transmissive |
| Interface | USB |
| Print Technology | Thermal Transfer / Direct Thermal |
| Print Speed | Up to 4 ips (102 mm/sec) |
| Print Width | 4.25 inches |
| Paper Handling | Roll-fed, fanfold |
To Next Page
