What does it mean when my Monarch 9855 Printer displays “Please Wait RFID Initialization”?
The “Please Wait RFID Initialization” message on your Monarch printer indicates that you sent an RFID batch before the printer established communication with the interrogator. The printer will proceed to print the RFID batch once communication with the interrogator is successfully completed.
What does it mean when Monarch 9855 Printer displays “Monarch Initializing.”?
If your Monarch printer displays “Monarch Initializing” and the message does not disappear, turn off the printer, wait fifteen seconds, and then turn it back on.
What does it mean when my Monarch 9855 displays “747 Time out failure.”?
When the Monarch printer displays a “747 Time out failure,” it means that an RFID command (such as read or program) has failed to complete within the maximum allowed time.
Why is my Monarch 9855 displaying “748 Invalid data length/data mismatch from RFID interrogator module.”?
The error message “748 Invalid data length/data mismatch from RFID interrogator module” on your Monarch printer indicates that the RFID interrogator module has detected a problem with the data it received from the printer.
General| Resolution | 203 dpi |
|---|---|
| Print Method | Thermal Transfer |
| Max Print Width | 4.09 in (104 mm) |
| Media Sensor | Reflective and Transmissive |
| Interface | USB |
| Print Technology | Thermal Transfer / Direct Thermal |
| Print Speed | Up to 4 ips (102 mm/sec) |
| Print Width | 4.25 inches |
| Paper Handling | Roll-fed, fanfold |
Step-by-step instructions for loading label rolls or tag supplies into the printer.
Specific procedures for loading labels when using the optional peel mode feature.
Guidance on using linerless printing supplies and related setup.
Instructions for loading and considerations for using string tag supplies.
Detailed steps for correctly loading a ribbon roll into the printer.
How to configure the printer for different types of supply materials like die-cut or continuous.
Configuring ribbon usage and adjusting the printer's print speed for optimal performance.
Configuring the printer's feed mode and backfeed settings for label handling.
Adjusting print, margin, cut, and dispense positions for accurate label output.
Adjusting the darkness and quality of the printed output for optimal readability.
Instructions for enabling and setting up the optional barcode verifier.
Configuring serial port parameters like baud rate, word length, parity, and flow control.
Configuring parallel port settings, including port selection and communication mode.
Options for using flash storage, formatting, checking availability, and packing memory.
Guidance on resolving common printer errors, messages, and operational issues.
To Next Page
