EasyManua.ls Logo

Monarch SE 2004 - Page 158

Default Icon
346 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158 | Section 4 Appliances ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ----------------- Monarch SE 2004
Control Panel - Four
Door:
ON/OFF Button - Turns the refrigerator on or off.
- Push the ON/OFF button to start the refrigerator in Auto mode.
- Push and hold the ON/OFF button for two seconds to shut it off.
LED Display - This screen is used for mode, temperature and fault
code display.
MODE Button - Controls the operation mode of the refrigerator.
- Push and hold the MODE button to select between Automatic AU,
AC or LP operation.
TEMP SET Button - Adjusts the temperature.
- To adjust push and hold the TEMP SET button.
- Number "9" is the coldest setting.
Manual Mode:
When one of the two manual modes is selected:
1. AC = The refrigerator is operating on AC electric.
2. LP = The refrigerator is operating on LP-Gas.
Automatic Mode:
This feature selects AC over LP-Gas operation. If AC discontinues the alarm
sounds and the refrigerator switches to LP-Gas operation. If the refrigerator fails to
light, the alarm sounds and a code displays.
• Press and hold the MODE button until AUTO displays, release the
button.
• Press and hold the TEMP SET button until the desired temperature
displays, release button.
• In AUTO mode, AC or LP will remain lit for 10 seconds or when a
mode has changed.
030864
The Refrigerator Control Panel requires 12 Volt DC to operate.

Table of Contents