Monarch SE 2004 - Monitor Panel (Lp Tank); Measurement

Monarch SE 2004------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Section 7 LP-Gas System | 265
Tank Measurement:
To measure level of a tank simply push
button on display panel corresponding to
tank you wish to measure. Observe the
gauge.
Calibration:
The monitor panel is calibrated at
the factory for accuracy.
NOTE: The LP-Gas
gauge is not adjustable.
MONITOR PANEL (LP TANK)
- Measurement
060159c
LP Tank Gauge
Use this switch to test tanks.
Momentary push & hold.
050256