Moons' M2DV-1D82D - Analog Velocity Gain

M Series AC Servo
User Manual
94
Rev. 1.1
9/13/2021
400-820-9661
B. Di󰀨erential Analog Input
PIN type Signal PIN number Function
Input
ANA1 16
Analog velocity input for di󰀨erential input signal
ANA2 18
DGND 15 Analog velocity input signal grounding (digital ground)
Differential analog input
16
15
+
-
18
17
+
-
Host controller
D/A Output
DGND
DGND
7.3.3.2 Analog Velocity Gain
Analog input voltage range is between -10V~+10V. In analog velocity, it requires to set the velocity value
to correspondent input voltage value. It can be set via M servo suite software or P-50 (AG) from the drive.
Parameter Name Data Range Default Unit Description
P-50 (AG)
Analog Velocity
Gain
-100~100 20 rps
The corresponding motor rotary velocity for
10vdc analog input voltage.
NOTE: if you need to view or set the velocity value on drive
’
s control panel, please refer to
following calculation:
Drive display value=
x 240
is target setting velocity rev/second (rps)
Setting Via Software