SECTION 5
43
Miscellaneous
Units: use the drop-down menu to select the units of measure for speed, and patient height and weight.
ST Units: use the drop-down menu to select the units of measure for the ST values.
Date Format: use the drop-down menu to select the desired date format.
Dept. Header: type the desired header to print on the final report. Use up to 64 characters.
Dept. Footer: type the desired footer to print on the bottom of the printout.
Export Directory: multiple export directories may exist to allow the export of final reports across the network.
Export Format: select PDF, Mortara XML, Alternate 1 XML, TIFF, or DICOM.
Request Directory: type the desired path to receive patient demographics from a hospital information system or
other appropriate medical records device.
Display ST/HR Index, Display Double Product (HR*BP), Display METS: when enabled, values will display
during test. Double Product displays current value only; maximum value does not display. These settings
cannot be changed once the test begins.
Max HR Formula (Male): use the drop-down menu to choose desired formula. 220 – Age is usually preferred
for males.
Max HR Formula (Female): use the drop-down menu to choose desired formula. 210 – Age is usually
preferred for females.
Sub Directories: when enabled, exported reports are placed in the format(s) selected. Reports are identified by
ID number followed by patient name with a tagline signifying export format. Do NOT use subdirectories with
networking to EMR.
Export On Save: when enabled, final report is automatically exported to the defined export directory once
saved in Report Manager.
To Next Page
Loading...
