Mortara X-Scribe - Page 60

SECTION 5
42
Printout
 ECG Print Speed: use the drop-down menu to select the desired ECG print speed in millimeters/second.
Standard print speed is 25 mm/s.
 ECG Print Format: use the drop-down menu to select the desired format of the printed ECG. Choose 6x2, 3x4,
3x4+1, 3x4+3, or 12x1.
 Rhythm Lead: use the drop-down menu to select the rhythm lead to print with the 12-lead ECG.
 Zoom ST Lead: when enabled, the zoomed ST appears on all 12-lead ECG printouts.
 12 Lead Average: when enabled, the 12 median average beats appear on all 12-lead ECG printouts.
 Use the drop-down menu to choose the desired printer: choose Z200+ to use the Mortara thermal printer (Grid
check box is disabled); choose Default Printer to use the default printer currently set in Windows (Grid check
box can be selected for grid printing); choose Off to store the print without printing to paper.
 Continuous Print Speed: use the drop-down menu to select the desired print speed for a continuous rhythm
printout.
 Continuous Print Format: use the drop-down menu to select the desired format.
 Use the drop-down menu to choose the desired printer. Grid printing is not an option for continuous printouts.
 Duke Score when checked will include the Duke Score value in the final report.
 FAI% when checked will include the FAI% in the final report.
 One Page Summary when checked will produce a one page abbreviated summary report at the end of the
procedure.
Arrhythmias / Rhythm Events
 Event Print Speed: use the drop-down menu to select the desired print speed of 25 or 50 mm/sec for the event
printout.
 Event Print Format: use the drop-down menu to select the desired format for the printed ECG. Choose 6x2,
3x4, 3x4+1, 3x4+3, or 12x1.
 Rhythm Lead: use the drop-down menu to select the rhythm lead to print with the 12-lead ECG.
 Use the drop-down menu to choose the desired printer: choose Z200+ to use the Mortara thermal printer (Grid
check box is disabled); choose Default Printer to use the default printer currently set in Windows (Grid check
box can be selected for grid printing); choose Off to store the print without printing to paper.
 Pre-Exe Events: use the up/down arrows to select the maximum number of events available during the Pre-
exercise phase.
 PVC/min: use the up/down arrows to select the maximum number of PVC events per minute.
 Couplet/min: use the up/down arrows to select the maximum number of couplet events per minute.
 VRun/min: use the up/down arrows to select the maximum number of ventricular run events per minute.
NOTE: X-Scribe automatically detects an arrhythmia event. It is stored, can be displayed on trends display,
and printed if Arrhythmia Printouts is enabled in the Softkey pop-up menu.
 Event labels: use Add or Delete to modify the list. This list allows the user to label an event that has occurred.