Performance Checks
17
10. Press Side Button 3; “98/1”appears; release, “98/0” appears.
11. Press the PTT Switch; “1/1” appears; release, “1/0” appears.
12. Keypad Checks:
Model III Only—
- Press 0, “48/1” appears; release, “48/0” appears.
- Press 1, “49/1” appears; release, “49/0” appears.
- Press 2, “50/1” appears; release, “50/0” appears.
- Press 3, “51/1” appears; release, “51/0” appears.
- Press 4, “52/1” appears; release, “52/0” appears.
- Press 5, “53/1” appears; release, “53/0” appears.
- Press 6, “54/1” appears; release, “54/0” appears.
- Press 7, “55/1” appears; release, “55/0” appears.
- Press 8, “56/1” appears; release, “56/0” appears.
- Press 9, “57/1” appears; release, “57/0” appears.
- Press *, “58/1” appears; release, “58/0” appears.
- Press #, “59/1” appears; release, “59/0” appears.
All Display Models—
- Press V, “128/1” appears; release, “128/0” appears.
- Press h, “
129/1” appears; release, “129/0” appears.
- Press U, “130/1” appears; release, “130/0” appears.
- Press the left-hand D key on the top row of keys, “131/1” appears;
release, “131/0” appears.
- Press the center E key, “132/1” appears; release, “132/0” appears.
- Press the right-hand F key, “133/1” appears; release, “133/0” appears.
- Press
@ button, “134/1” appears; release, “134/0” appears.
- Press
X (up arrow), “135/1 appears; release, “135/0” appears.
- Press
Y (down arrow), “136/1” appears; release, “136/0” appears.
Non-Display
Radio Test
Mode
Entering Non-
Display Radio
Test Mode
1. Turn the radio on.
2. Within 10 seconds after the top green LED turns off, press Side button 3 five
times in succession.
3. Press Side Button 1 to put the radio into the Control Top and Keypad test
mode (non-display radio). Go to the “Control Top and Keypad Test Mode
(Non-Display Radio)” section on page 18.
To Next Page
Loading...
Need help?
General
