2-16
2.6.3 3AH Backup Battery
The 3AH Backup Battery (p/n: FLN9059) can be assembled on the chassis,
NEMA4X, and NEMA4 housing enclosures.
In the NEMA4X housing enclosure the backup battery is pre-installed on the 3-
slot metal chassis using a special bracket (p/n: FHN6058). Refer to Figure 2-15.
In the NEMA4 housing enclosure the backup battery is pre-installed in the RTU
housing using a special bracket (p/n: 0780311K01). Refer to Figure 2-15.
Assembly Instructions:
1. Connect the loose end of the battery cable to the “BAT” connector on the
Power Supply Module (More), as shown in Figure 2-15.
N
N
o
o
t
t
e
e
:
:
The IRRInet-XL RTU is supplied with the backup battery cable
disconnected in order to prevent battery leakage during shipping.
Battery Connection
Battery Connection
Backup
Battery
Backup
Battery
Figure 2-15 3AH Backup Battery Connection
2.6.4 3AH Backup Battery Field Replaceable Parts
Table 2-5 3AH Backup Battery Field Replaceable Parts
Part No. Description
6580283E03 5 Amp Fuse Blade
To Next Page
Loading...
