4 - 20 MC70 User Guide
Figure 4-33
Creating a Conference Call
7. Tap End or press the red phone key on the EDA keypad to end the conference call.
Text Messaging
Use the Text Messages window to send and receive text messages to and from mobile phones. The text can
contain words, numbers, or an alphanumeric combination no longer than 160 characters.
Short text messages delivered over mobile networks transmit from the sending EDA, are stored in a central
short message center, then forwarded to the destination mobile device. If the recipient is not available, the
short message is stored and can be sent later. With the PCS networks based on GSM, EvDO, and TDMA
technologies supporting SMS, SMS is a universal mobile data service.
Sending a Message
To send a message:
1. Tap Start > Phone or press the green phone key on the EDA’s keypad to display the Phone keypad.
2. Tap Contacts.
3. Tap and hold on a contact and select Send Text Message.
NOTE To speak privately with one party during a conference call, tap Menu > Private. To include all parties
again, tap Menu > Conference.
To Next Page
Loading...
Need help?
General
