Chapter 6
Maintenance & Troubleshooting
Chapter 6
Maintenance & Troubleshooting
Introduction
This chapter includes instructions on cleaning and storing the EDA, and provides troubleshooting solutions for
potential problems during EDA operation.
Maintaining the EDA
For trouble-free service, observe the following tips when using the EDA:
•
Do not scratch the screen of the EDA. When working with the EDA, use the supplied stylus or
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or
other sharp object on the surface of the EDA screen.
Symbol recommends using a screen protector, p/n KT-67525-01.
•
The touch-sensitive screen of the EDA is glass. Do not to drop the EDA or subject it to strong impact.
•
Protect the EDA from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and
keep it away from heat sources.
•
Do not store or use the EDA in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the EDA. If the surface of the EDA screen becomes soiled, clean it with a
soft cloth moistened with a diluted window-cleaning solution.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.
•
A screen protector is applied to the EDA. Symbol recommends using this to minimize wear and tear.
Screen protectors enhance the usability and durability of touch screen displays. Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device’s screen looking new
• Quick and easy installation.
To Next Page
Loading...
Need help?
General
