Using Bluetooth 3 - 21
7. In the Action: drop-down list, select Send A Picture.
8. Tap . The Send Local Picture window appears.
Figure 3-31
Send Local Picture Window
9. Navigate to the picture to send to the other device.
10. Tap Open.
11. Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
accept the picture. A
Send Picture dialog appears.
12. Tap Ok.
Headset Services
To connect to a Bluetooth headset:
1. Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-24.
2. Discover and bond (pair) with the headset. See Bonding with Discovered Device(s) on page 3-9.
3. In BTExplorer, select the Remote Devices folder.
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on the remote device and select Explore. A headset service item appears.
7. Tap and hold on the headset service name and select Connect. The EDA connects to the headset. Refer to
the headset user manual for instructions on communicating with a Bluetooth device.
To adjust the microphone gain:
1. Tap and hold on the headset service item and select Adjust Microphone from the pop-up menu. The
Microphone Properties window appears.
2. Select the slider and adjust the gain.
3. Tap OK.
To Next Page
Loading...
Need help?
General
