Accessories 5 - 5
Figure 5-4
EDA Battery Charging
Charging the Spare Battery
Figure 5-5
Spare Battery Charging
Battery Charging Indicators
The Single Slot USB/Serial Cradle charges the EDA’s main battery and a spare battery simultaneously.
The EDA’s charge LED indicates the status of the battery charging in the EDA. See Table 1-2 on page 1-7 for
charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See Table 5-1 for charging status indications.
The standard battery fully charges in approximately four hours and the extended capacity battery fully charges
in approximately eight hours.
Charge Status LED
Spare Battery
Spare Battery
Charging LED