2 - 18 MC70 User Guide
Function Buttons
The EDA’s buttons perform certain functions.
Figure 2-14
Function Buttons
•
Power: Press the red Power button to turn the EDA screen on and off. The EDA is in suspend mode
when the screen is off. For more information, see Powering On the EDA on page 1-8. Also use the
Power button to reset the EDA by performing a warm or cold boot. See Resetting the EDA on page 2-23.
•
Scan/Action: Press to scan bar codes or capture images. See Data Capture on page 2-20.
Or, press to open an application or perform a function. See the Microsoft
®
Applications for Mobile and CE
5.0 User Guide to set an application to open.
•
Up/Down: Press to increase or decrease the EDA’s volume.
•
Action: Press to open an application or perform a function. See the Microsoft
®
Applications for Mobile
and CE 5.0 User Guide to set an application to open.
Stylus
Use the EDA stylus to select items and enter information. The stylus functions as a mouse.
•
Tap: Touch the screen once with the stylus to press option buttons and open menu items.
‘
?
:
-
Table 2-8
Special Characters (Continued)
Key Special Characters
Scan/Action
Button
Power Button
Up/Down Button
Action Button
Scan/Action Button
To Next Page
Loading...
Need help?
General
