3 - 20 MC70 User Guide
Figure 3-29
Select Contact Entry Window
9. Select a contact to send to the other device.
10. Tap OK.
11. Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to
accept the contact. A
Send Contact dialog appears.
12. Tap Ok.
Sending a Picture
To send a picture to another device:
1. Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-24.
2. Discover and bond (pair) with the remote device. See Bonding with Discovered Device(s) on page 3-9.
3. In BTExplorer, select the Remote Devices folder.
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 3-30
OBEX Object Push Window