Using Bluetooth 3 - 19
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
7. In the Action drop-down list, select one of the following options: Send Contact Information, Swap Contact
Information
, Fetch Contact Information, or Send a Picture.
Sending a Contact
To send a contact to another device:
1. Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-24.
2. Discover and bond (pair) with the remote device. See Bonding with Discovered Device(s) on page 3-9.
3. In BTExplorer, select the Remote Devices folder.
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 3-28
OBEX Object Push Window
7. In the Action: drop-down list, select Send Contact Information.
8. Tap . The Select Contact Entry window appears.
To Next Page
Loading...
Need help?
General
