Getting Started 1 - 13
Turning Off the Bluetooth and WAN Radios
To turn off the Bluetooth and WAN radios:
•
Tap the Connectivity icon (on non-WAN devices) or the Antenna/Signal icon (on WAN devices)
and select
Turn on flight mode
OR
•
Tap the Bluetooth icon and select Disable Bluetooth.
To turn on the Bluetooth and WAN radios:
•
Tap the Connectivity icon (on non-WAN devices) or the Antenna/Signal icon (on WAN devices)
and select
Turn off flight mode
OR
•
Tap the Bluetooth icon and select Enable Bluetooth.
On Devices with AKU 2.2 or higher
Windows Mobile 5.0 devices with AKU 2.2 or higher include Wireless Manager, which provides a simple method
of enabling, disabling, and configuring all the device’s wireless capabilities in one place.
To open
Wireless Manager, tap the Connectivity icon.
Figure 1-12
Opening Wireless Manager
Select
Wireless Manager.
NOTE The Flight Mode feature only turns off the WAN and Bluetooth radios. You must turn off the WLAN radio
separately.
NOTE To determine the operating system AKU version, see Configurations on page xii.
To Next Page
Loading...
Need help?
General
