Using Bluetooth 3 - 5
Wizard Mode
Wizard Mode provides a simple process for discovering and connecting to Bluetooth devices.
The following steps provide an example for using the Wizard to connect to remote devices.
1. Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.
2. Tap File > New Connection. The New Connection Wizard window appears.
Figure 3-4
New Connection Wizard Window
3. Select an action from the drop-down list. Options include:
•
Explore Services on Remote Device
•
Pair with a Remote Device
•
Active Sync via Bluetooth
•
Browse Files on Remote Device
•
Connect to Headset
•
Connect to Internet Using Access Point
•
Connect to Internet Using Phone/Modem
•
Connect to a Personal Area Network
•
Send or Exchange Objects
•
Associate Serial Port.
4. Tap Next. The BTExplorer searches for Bluetooth devices in the area and displays the devices in the Select
Remote Device
window.
NOTE Switching between Wizard Mode and Explorer Mode closes all active connections.
NOTE If you select Active Sync via Bluetooth, ensure that the Bluetooth software is set up properly on the host
device.
To Next Page
Loading...
Need help?
General
