Motorola MC70 User Manual

Maintenance & Troubleshooting 6 - 13
EDA battery does not
charge when Trigger
Handle is placed in a
cradle.
Trigger Handle is
not properly
seated in the
cradle.
Remove the Trigger Handle from the cradle and reinsert.
Power is not
available to the
cradle.
Ensure that power connections to the cradle are connected
properly.
Cannot print to
printer.
Printer cable not
connected
properly.
Ensure cable is connected properly to the printer and Trigger
Handle.
EDA does not wake
from suspend mode
when trigger is
pressed.
The trigger only
wakes the EDA
from the suspend
mode if a scanning
application is
active.
Press a key on the EDA to wake from the suspend mode.
Table 6-9 Troubleshooting the Trigger Handle
Problem Cause Solution

Motorola MC70 Specifications

General

Brand	Motorola
Model	MC70
Category	PDA
Language	English