Motorola MTH800 User Manual

106
Messages
Refer to “Messages” on page 145 for details.
Contacts
General
Contacts stores Private, Phone, and PABX numbers. Each
Contacts entry can store several numbers. A Contacts entry
contains:
•A name — A name is required if you are storing more than
one number to the entry; otherwise, it is optional. Typically,
this is the name of the person whose contact information is
stored in the entry.
•A Contacts type — Each number stored must be
assigned a Contacts type.
•A number — Each Contacts entry must contain a number.
This may be any type of phone number and Private ID.
•A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You can
accept the default Speed Dial number or change it.
Contact Icons
In the contact list display, the following icons may appear
next to the contact numbers to indicate the type of stored
number.
If set up by your Service Provider.it is not possible to create or
edit Contacts or dial a number which is not in the Contacts list.
The menu items for creating, editing, and deleting Contacts are
not available.
Contact Icon Description
Private ID Number
Mobile Phone Number
Home Phone Number

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000