Motorola MTH800 User Manual

47
TMO Group Call
Activated Transmit Inhibit is indicated by the solid orange
LED and flashing between the two displays:
Dynamic Group Number Assignment (DGNA)
DGNA provides the ability for a network operator or
authorised user to dynamically allocate new, or update
existing talkgroups to selected terminals over the air
interface. Using supplementary services messages (SS-
DGNA), the network operator can command your terminal to
add talkgroups or to update the existing talkgroups, or to
delete talkgroups from the list. This operation is performed by
transmitting the data into your MTH800.
DGNA Reception with Notification Message
When a DGNA message is received and
DGNA notification was configured by your
Service Provider, you will get a tone
indication and notification message
(“Talkgroup list updating”), and then a
display of the new assignments.
You can use the View, Attach, Back soft
keys, , Rotary knob,
, and Emergency
button.
Pressing one of them exits the DGNA display.
Your Service Provider can gather some Talkgroups under one
Super-group and transmit it to your MTH800 as a DGNA. In
such a case, you will be able to participate in calls to/from all
the groups in the Super-group.
Folder 1
Police
Hello
Optns Contcs
TXI Mode
Activated
TXI Mode
Folder 1
Police
Hello
Contcs
TalkGroup
list
updating
Talkgroups:
10 Added
6 Removed
View Back
M
E
N
U

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000