Motorola MTH800 User Manual

35
Getting Started
• Select Covert Mode in the Security menu (refer to “Covert
Mode” on page 108).
High/low Audio in Covert Mode
• If none of the accessories are connected to the radio then
high/low audio toggle is not enabled.
• External earpiece/PHF connected - by pressing high/low
toggle button the audio mode switches from the Internal
Microphone/Internal Earpiece to PHF Microphone/PHF
Earpiece
• PHF earpiece only connected - by pressing high/low
toggle button the audio mode switches from the Internal
Microphone/Internal Earpiece to Top Microphone/PHF
Earpiece.
Local Area Service
This mode, also called Fallback Mode, allows more than one
terminal from the same site to communicate when the link
between the site and network central controller fails. Entering
and exiting Local Area Service (that is, returning to System
Wide Services) is done automatically.
Entering Local Area Service
When the MTH800 receives a Local Area Service indication
from the system, the following occurs:
• The MTH800 sounds a tone.
• The display shows the “Local Area Service” message.
• Display icons and soft keys turn brown.
• Any call in progress is dropped upon entering Local Area
Service mode.
If configured by your Service Provider, this message/alert is
periodically repeated to remind you that the MTH800 is still
operating in Local Area Service mode.

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000