Motorola MTH800 User Manual

143
The Menu
Location
Refer to “GPS Location Service” on page 81 for details.
Packet Data
This menu item allows to display statistical
values related to a packet data connection. If
Multi Slot Packet Data Service is enabled by
your Service Provider the screens present
information about
• Amount of sent data,
• Amount of received data,
• Bandwidth of the data session
• Data encryption status.
Viewing Sent Data Statistics
1. Select Sent Data in the Packet Data sub-
menu.
The number of KBytes sent since current
packet data activation is displayed.
Additionally the throughput is shown:
9 kbps (e.g.) — active packet data session.
N.A. — standby packet data session.
Viewing Received Data Statistics
1. Select Received Data in the Packet Data sub-menu.
2. The number of KBytes received since
current packet data activation is displayed.
Additionally the throughput is shown:
9 kbps (e.g.) — active packet data session.
N.A. — standby packet data session.
Data services are only available in TMO. The data option must
be set to Voice&Data or Data Only. (Refer to “Setting Up the
Data Function” on page 117).
Packet Data
Sent Data
Select Back
Received Data
Bandwidth
Encryption
Sent Data
Sent: 100KB
Throughput:
9kbps
Back
Received Data
Received: 100KB
Throughput:
9kbps
Back

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000