Motorola MTH800 User Manual

142
Selecting Direct Mode
This sub-menu allows you to select the
mode your MTH800 will be operating on.
To set up your operating mode:
1. From the main menu, select More >
Networks > Direct Mode.
2. The MTH800 switches to Direct Mode.
Setting Transmit Inhibit (TXI) Mode
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in potentially
explosive areas.
To activate the TXI Mode:
1. From the main menu, select More >
Networks > TXI Mode.
2. Select Activate.
The MTH800 will sound the “Transmit Inhibit” tone. The
display shows TXI Mode in the first row, and the solid amber
LED indicates the TXI Mode.
To deactivate the TXI Mode, e.g. after
you have left the area
where transmission is prohibited:
1. From the main menu, select More > Networks > TXI
Mode.
2. Select Deactivate.
The MTH800 sounds the “Transmit Inhibit” tone and exits
TXI.
It is not possible to switch from Direct Mode to Trunked Mode, if
the MTH800 is in Transmit Inhibit Mode.
All menu items which cause transmitting are blocked in TXI
Mode. It is not possible to change the group.
Networks
Networks Sel
Select Back
Trunked Mode
Direct Mode
TXI Mode
TXI Mode
Activate
Select Back
Deactivate

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000