Motorola MTH800 User Manual

25
Getting Started
Aliases can be up to 12 characters in length and may consist
of letters, numbers, and spaces.
Aliases are displayed during contact list scrolling or during an
incoming call. Aliases are also used in alphanumeric search
to retrieve numbers from your memory list.
The following screens show examples of how the caller’s
private number can be displayed.
Screen Saver
If your Service Provider configured this feature, the screen
saver will automatically cover the MTH800 display after the
MTH800 stays idle for a pre-programmed period of time. If
you press a key or a call arrives, the screen saver is
deactivated and the MTH800 resumes standard operation.
You can also activate this feature manually, by pressing the
relevant pre-programmed button (either a side button or
numeric key). For example, if manually activated during a
group call, the screen saver allows to hide the caller’s identity
for confidentiality. The screen saver consists of a logo and an
alphanumeric text. Check in the menu options whether the
Service Provider has given you the capability of entering your
own screen saver text (see page 125).
Home Display Text Message
Your MTH800 is provided with a feature that
allows your Service Provider to send special
text messages to your MTH800 display.
The message is displayed when your
MTH800 is idle.
Private ID
without alias
Private ID
with alias
Prvt In Use
Prvt In Use
Simon
orPrivate ID
without alias
<Home display
text>
Optns Contcs

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000