79
Emergency Operation
Power on in pseudo power off
User presses the Emergencey button, the radio indicates
power on but it is still in Silent Emergency mode.
Silent Emergency mode and PIN protect
The radio enters the Silent Emergency mode while in the PIN
protected state, it asks the user for the unlocking code. When
the radio exits the Silent Emergency mode, it is still in the PIN
protected state.
Emergency in DMO
Overview
You can initiate an Emergency Group Call to a group.
You can receive an Emergency Group Call:
• From the selected talkgroup
• From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI call.
• From an open group. (An open group is a super-group to
which all DMO groups belong.)
Emergency calls can be placed via gateway and repeater.
For gateway and repeater settings, see “Gateway/Repeater
Selection” on page 52.
Hot Microphone Feature in DMO
This functionality is allowing the user, that is in emergency
situation, to be heard without pressing the PTT. It needs to be
enabled by your Service Provider for DMO mode. For the
detailed functionality please see .Hot Microphone Feature in
TMO
Changing Folder or Group
Proceed as explained in the Group Call section, page 37.
When the radio is in emergency mode and it switches from
TMO to DMO (and vice versa), the Hot Mic feature is still active.
To Next Page
Loading...
Need help?
General
