168
What to do if...
Your MTH800 flashes the following messages:
Messages Message Description
...-Rcvd Call received but not answered, or rejected.
Attachment Failed The MTH800 could not perform talkgroup attachment. The
MTH800 keeps on trying. If it does not succeed, try another
talkgroup.
Authenticate
Failure
The MTH800 could not register on an Authenticated system
(for example, the Authentication key is incorrect, or
Authentication is disabled in the MTH800).
Battery Flat The battery is uncharged. Recharge the battery.
Call Canceled Called MTH800 cancelled the call.
Call Ended • Faulty channel. Please try later.
• Called MTH800 ended the call.
Call Preempted Channel being used for priority.
Connection to
Server Lost
This is triggered by a WAP server sending session disconnect.
Emgcy In Use:
Wait For Mic
The Hot Microphone feature is active, but the channel transmit
grant has been given to another Emergency Call on the same
talkgroup. The MTH800 microphone is not active during this
time, but the MTH800 will automatically try to regain talk permit
after a predetermined time.
Emgcy Mic Ended The Hot Microphone timer has automatically expired, or the
user has pressed the PTT button to cancel the Hot Microphone
feature.
Emgcy Mic On The Hot Microphone feature is active, and the MTH800 is
automatically transmitting hands free emergency audio.
Empty Entry The speed number you dialled does not exist, or the number
exists but the group is non-selectable.
Faulty Unit Error... Self-test failed. An operational fault has been detected with
your MTH800. Record the error number. Turn your MTH800 off
and contact service.
To Next Page
Loading...
