Motorola MTH800 User Manual

26
The message will stay on your MTH800 display until a new
message is received.
If configured by your Service Provider, your MTH800 will
display an internal Home display until another message is
received.
Time & Date
If your Service Provider configured this feature, the MTH800
shows current time and date on home display.
You can also check time and date, wherever in menu, by
pressing relevant one-touch button.
Check in the menu options whether the Service Provider has
given you the capability of customising time and date settings
(see page 121).
Terminal Disable/Enable
Your MTH800 is provided with a feature that allows your
Service Provider to disable it temporarily in case it is stolen.
When your MTH800 is disabled, no calls can be initiated or
received.
While your MTH800 is disabled, it will look and act like it is
turned
Off.
If you try to turn your MTH800
On, when it is disabled, it will
operate as described above.
If your MTH800 is found, your Service Provider can re-enable
it. After your MTH800 is re-enabled, you may resume normal
operation.
Terminal Permanent Disable
Your MTH800 is provided with a feature that allows your
Service Provider to disable it permanently in case it is stolen
or lost. When your MTH800 is disabled permanently, it
becomes inoperable.
After a Permanent Disable the MTH800 can not be re-
enabled by your Service Provider.

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000