Motorola MTH800 User Manual

151
Messages
•Select Delete and press Yes to delete the message. When
the display shows “Deleted: Message
n”, the current
message is deleted from the Inbox. The display shows the
next message (if any) or the message list.
•Select Delete All and press Yes to delete all the
messages. When the display shows “Deleted: All
Messages”, all the messages are deleted from the Inbox.
The display shows the next message (if any) or the
Messages sub-menu.
•Select Reply. This invokes the edit screen. The old
message body serves as the default message and the
message originator is the destination. Press Send, PTT or
, to initiate a call to the message originator.
•Select Forward. This invokes the edit screen. The old
message body serves as the default message. Press PTT
or , to initiate a call. Enter the recipient’s number and
press PTT or , to call.
•Select Refresh to re-order the inbox list and see new
messages (if any).
• Press Back to return to the previous display.
Calling a Number in a Message
You can return a voice call to the sender of a
message or to any number that is embedded
in the message text. Your Service Provider
should configure this feature.
1. In the inbox list, highlight a message.
OR
read a message containing number(s).
2. Press PTT or .
3. The display lists the numbers (including the sender’s
number).
Radio notifies you when the message is too long.
Message 1
Call me at 15.00
num 6743 or 6677
Reply Back

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000