Motorola MTH800 User Manual

152
4. To call, scroll to your selection and press PTT or .
5. Press CType
to select the type of call (Private, Phone, or
PABX). Then press PTT or .
If necessary, save the entries in the contact list.
Outbox
Only Store & Forward messages are stored in Outbox. To go
to Outbox press > Messages > Outbox.
Submenu of the Outbox includes:
•Select Store and press Select to store the
message as a template in the template list.
•Select Delete and press Yes to delete the
message. When the display shows
“Deleted: Message
n”, the current
message is deleted from the Outbox. The
display shows the next message (if any) or
the message list.
•Select Delete All and press Yes to delete all the
messages. When the display shows “Deleted: All
Messages”, all the messages are deleted from the
Outbox. The display shows the next message (if any) or
the Messages sub-menu.
•Select Resend to edit the message to the same
participants.
•Select Forward. This invokes the edit screen. The old
message body serves as the default message. Press PTT
or , to initiate a call. Enter the recipient’s number and
press PTT or , to call.
•Select Refresh to re-order the outbox list and see new
messages (if any).
If configured by your Service Provider it is not possible to call
back to a number that is not in the Contacts List.
M
E
N
U
Outbox Menu
Store
Select Back
Delete
Delete All
Resend
Forward

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000