Motorola MTH800 User Manual

32
A PPC Call with Emergency Call priority will be displayed on
the screen as “
Emergency” (instead of “Priority”).
Broadcast Call
The Broadcast Group Call (also called Site
Wide Call) is a high-priority group call from the
console operator (or dispatcher) to all users
located at one or more sites. The terminals
are configured to monitor a Broadcast Call,
but the users cannot talk back.
The call can be received as normal
Broadcast Call or Emergency Broadcast Call.
The Broadcast Call pre-empts an on-going
Group Call that has the same (or lower) call
priority.
For selecting a talkgroup during a broadcast
call, see “Selecting a Group” on page 38. For changing folder
during a broadcast call, see “Using the Numeric Keypad -
Speed Dialing” on page 40.
Trunked Mode Home Display
Full-duplex Private PPC Received
<Any> in Use
<Any> in Use
Priority
Private Call
David
2234
Priority
Prvt In Use
David
2234
Press
PTT
Press
any key
Call
Preempted
Call
Preempted
Priority David
2234
Priority
Prvt In Use
David
<animation> <animation>
Mute Spkr
Mute Spkr
Group In Use
David
Broadcast
Optns
Emgcy In Use
David
Broadcast
Optns

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000