Motorola MTH800 User Manual

56
• If you press
PTT while the gateway is available, you will
start a DMO call with gateway. The Gateway icon will be
solid.
Making a DMO Group Call via Repeater
1. While in DMO, choose the Repeater option as described in
“Selecting DMO Group Call via Repeater” on page 53.
2. Place the call for the selected talkgroup:
• If you press
PTT while the repeater is not available, you
will start a DMO call without repeater. The Repeater
icon will disappear.
• If you press
PTT while the selected
repeater is available, but the call is
rejected by the repeater your MTH800
will sound a tone and display the
following screen, informing you that the
call will be setup without repeater. The Repeater icon
will disappear.
• If you press
PTT while the repeater is available, you will
start a DMO call with repeater. The Repeater icon will
be solid.
Making a DMO Group Call via Gateway and Repeater
1. While in DMO, choose the Gateway and Repeater option
as described in “Selecting DMO Group Call via Gateway
and Repeater” on page 54.
2. Place the call for the selected talkgroup:
• If you press PTT while both gateway and repeater are
not available, you will start a DMO call without gateway
and repeater. The Gateway and Repeater icons will
disappear.
• If you press PTT while both gateway and repeater are
available, but the call is rejected by the gateway, a
repeater call will be attempted.
MS - MS
Call

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000