53
DMO Group Call
Automatic — the MTH800 will use the first
available gateway for that talkgroup. The
Gateway icon will flash upon selecting that
option.
Specific
— the MTH800 will use only the
gateway with the specified Gateway
address for that talkgroup.
Upon selecting “Specific”, you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your Service
Provider or previously entered by
yourself via the keypad. Press Edit and
then Ok to use the current address, or
enter a new address via the keypad,
and press Ok. The Gateway icon will
flash upon selecting the gateway.
•“None”, indicating that no gateway was
selected for that talkgroup. Press Edit
and enter an address via the keypad,
Press Ok. The Gateway icon will flash
upon selecting the gateway.
When the MTH800 detects the suitable
gateway, the Gateway icon will turn solid.
Selecting DMO Group Call via Repeater
While in DMO, proceed as follows to choose the Repeater
option to set up a call via Repeater for the selected talkgroup:
1. Press Optns, use the navigation keys to scroll to Config
and press Select.
2. Scroll to Repeater and press Select.
GW Options:
Automatic
Specific
Select Back
Selected
Gateway:
1022
Edit Back
Selected
Gateway:
None
Edit Back
DMO Folder 1
Police
Hello
Optns Contcs
To Next Page
Loading...
Need help?
General
