141
The Menu
Selecting this sub-menu causes your MTH800 to recognise
the first network on the allowed network list only and to
register to it.
Using the Select Net Registration
If configured by your Service Provider, this sub-menu allows
you to select manually the network from the allowed network
list you want your MTH800 to be registered to.
1. From the main menu, select More > Networks > Networks
Sel > Select Net.
2. The list of the allowed networks is displayed. Scroll to the
desired network.
A network may have an alias. Press to view the
network ID. Then press Select.
3. Return to the Home display. The display shows the network
ID or alias.
Selecting Trunked Mode
This sub-menu allows you to select the
mode your MTH800 will be operating on.
To set up your operating mode:
1. From the main menu, select More >
Network > Trunked Mode.
2. The MTH800 switches to Trunked Mode.
It is up to your Service Provider to ensure your own MTH800
identity is allowed to register on other networks in your list.
Some groups may not be available on other networks.
It is not possible to switch from Direct Mode to Trunked Mode, if
the MTH800 is in Transmit Inhibit Mode.
M
E
N
U
Networks
Networks Sel
Select Back
Trunked Mode
Direct Mode
TXI Mode
To Next Page
Loading...
