Motorola MTH800 User Manual

6
The MTH800 can be either
On or Off during charging.
1. Insert the connector on the charger into the socket at the
base of the MTH800. Select the required plug adapter (UK
or European type) and connect to the charger. Then plug
the charger into a suitable mains socket.
2. The MTH800 displays the Charger Connected message
only if the MTH800 is
On when connecting the charger.
If the MTH800 is
Off, the display shows an icon of the
battery in charging. Remove the MTH800 from the charger
only when the display goes off.
The Battery icon shows the charging status (see below).
Battery Capacity Information
Battery Maintenance
The performance of the rechargeable battery delivered with
your terminal depends on the way the battery is treated.
Therefore, to comply with the Motorola warranty for batteries
and to assure high performance and a long life cycle of your
Motorola rechargeable battery, please read and follow the
maintenance rules stated below.
Information Description
Green icon Full (50% - 100% capacity)
Yellow icon Middle (20%-50% capacity)
Red icon Low (10% - 20% capacity)
Empty icon Very low (5%-10% capacity)
Low Battery message Less than 5% capacity
FullEmptyFull
Battery Charge ProgressBattery Capacity
Empty

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000