155
Messages
• Edit (In the example, a registration
message is displayed)
Editing a Predefined Template
Check with your Service Provider for the types of predefined
templates in your terminal.
There are three types of predefined templates:
• Alphanumeric—enter characters and digits
• Numeric—enter digits
• Mixed—enter digits, *, and #
The cursor is located before the first character. To move the
cursor forward, scroll right. The editor functions in overwrite
mode.
After editing a template, you can send it.
Sending a Predefined Template
1. Press Send, PTT, or , or the relevant one-touch numeric
key to send the message.
2. The display will show one of the following delivery reports:
• Message Delivered — to indicate that the message
was successfully sent and received.
• Message Failed — the message was not received.
3. After sending the message, your MTH800 will return to the
predefined template list or to the message editor screen.
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
It is recommended to wait for the message acknowledge before
sending a new message.
Register
ABC 27 |
Send Delete
To Next Page
Loading...
