23
Getting Started
Programmable Keys (0-9, * and #)
The MTH800 supports the one-touch feature that allows you
to select/activate commonly used features by pressing and
holding an assigned key. Your Service Provider should
program the keys with the relevant features.
The following table lists the programmable features and their
availability in specific MTH800 states/modes. For detailed
information on the features, see the relevant section in the
user guide.
Feature Description
Talkgroup Switch Switches to a specific talkgroup
Previous Talkgroup
Switch
Switches to the previous talkgroup
(even if the operation mode was
different)
Talkgroup Scan Toggles on/off the Talkgroup Scan
function (TMO only)
DMO/TMO Toggles between DMO and TMO
Status Message Sends a dedicated status message to a
dedicated address
Text Message Template Sends a predefined/user defined
template to a dedicated address
Call Dial (Private,
Phone, PABX)
Initiates a call to a predefined entry in
the contact list
Vertical Flip Display Toggles on/off vertical flip
Transmit Inhibit (TXI) Toggles between activated and
deactivated TXI Mode.
Screen Saver Activates screen saver.
Backlight Adjustment Toggles on/off backlight.
Covert Mode Toggles on/off covert mode.
Time & Date Shows time and date.
If dialing via one-touch numeric key is enabled, one-touch dial
is disabled (see page 68).
To Next Page
Loading...
Need help?
General
