Motorola MTH800 User Manual

49
TMO Group Call
Message addressing and sending:
• the address can be predefined by the Service Provider, if
not it is sent to currently selected group
• if no group is selected the message is sent to the reserved
address
• message is sent even if the user is involved in any active
call.
The indication depends on the setting from the Service
Provider. Visible/audible indications can be disabled for the
status message.
When the radio is PIN locked the user can still press the
Button/Footswitch to send the message.
If the radio is out of service the user will only see indication
that the operation failed.

Motorola MTH800 Specifications

General

Frequency Range	380-430 MHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
RF Power Output	1W
Battery Type	Li-Ion
Channels	1000